WIP: Border-radius value mapping and labeling

Bugs
1

Bricks Version: 1.3.6
Browser: 96.0.1 (64-Bit)
OS: Linux

In the case of the border radius, adopting the field labeling for the values from all the others, such as width, margin, padding, etc., is unfortunately somewhat impractical for the border radius, because then you unfortunately always have to test which corner you are currently entering the value for .

Border-Radius-Zuordnung
Border-Radius-Zuordnung1331Ă—547 35.9 KB

Unfortunately, I also find it misleading here that the value at Top (in the Picture “OBEN”) makes the setting at the bottom left.

Here I have an example how it is solved in the Oxygen.

Border-Radius-Bsp-Oxygen

Kind regards

Matthias Berndt

2

I didn’t want to open an extra topic for the following little translation problem.

But with the shadow in German it says “Einfügen” instead of “Innen”, which is why I assumed that you could use it to switch the shadow off and on separately.
Element-Schatten-einfĂĽgen
In addition, the values can only be operated in the positive range with the up and down buttons, but negative values can also occasionally be required.

3

Hi Matze, thanks for your report!

The border-radius input fields have been completely reworked in Bricks 1.3.7 and now include tooltips (top-left, top-right, etc.), which should help with the input.

Regarding the negative values in the shadow inputs and the translation error: Good catch!

Best regards,
timmse